Plumber in Downtown Henderson (Water Street District)

Downtown Henderson dates to the 1940s and 50s, when the Basic Magnesium plant built housing for its workers in the Pittman area. Homes that old were plumbed with galvanized steel supply lines that rust closed from the inside — brown water and weak pressure are the classic symptoms — and clay or cast-iron sewer laterals that crack and let roots in. Galvanized pipe eventually has to go; here's what a galvanized replacement involves.

The commercial side of Water Street has its own old infrastructure. Restaurants and storefronts along the redevelopment corridor run drain and grease lines that need real maintenance, and a neglected grease line backs up at the worst possible time — mid-service, with a full dining room. We service both the historic homes and the businesses next door.

We work the blocks off Water Street, Pacific Avenue and Atlantic near City Hall and the old Pittman neighborhoods. A recent call in a 1950s home was chronic low pressure the owner blamed on the city; it was actually decades of rust inside galvanized pipe, and a repipe brought the pressure right back.

Knowing how these mid-century Henderson homes and downtown buildings were originally plumbed lets us diagnose the real problem instead of chasing symptoms. On a house this old, the smart move is usually to plan the repipe on your schedule rather than wait for a line to fail on its own.

What downtown Henderson homeowners and businesses call us for most:

Downtown Henderson dates to the 1940s and '50s Basic Magnesium era, and the plumbing under those Pittman-area homes is exactly what trips up crews used to new construction.

Owners of these mid-century homes are often told the city is to blame for low pressure or a backup. Usually it's the house's own aging pipe. Knowing how Pittman-era homes near Pacific and Atlantic were originally plumbed lets us find the actual cause — decades of rust inside galvanized, or a cracked clay lateral — instead of chasing symptoms. On a house this old the smart move is usually to plan the repipe on your schedule, before a line fails on its own.